|
MIT300, MIT310, MIT310A, MIT320 and MIT330 - The MIT310, MIT320 and MIT330 testers incorporate dual solid-state displays which simultaneously show the test results numerically, and in the form of a moving-arc bar graph that accurately simulates the operation of an analogue meter.
The MIT330 additionally offers the facility to save test results to internal memory. Over 1000 result can be saved on site, and downloaded to a computer when convenient.
Data is stored in non-volatile memory, being retained when the instrument is switched off or batteries are exhausted.
A Job reference number can be selected for a range of results, allowing separate locations to be tested with the same tester and easily separated when downloaded. For more information see the product catalogue.
 CATALOGUE |
|
Megger MIT525 5-kV Insulation Resistance Tester - Offering CAT IV, the Megger MIT525 5-kV Insulation Resistance Tester is compact, light 5 kV insulation resistance tester for the diagnostic testing and maintenance of high voltage electrical equipment. Enclosed in a tough case it is both smaller and lighter than its predecessor making it even easier to carry and store.
As well as measuring insulation resitance to 10 T?, the Megger MIT525 5-kV Insulation Resistance Tester also offers various diagnostic tests such as Polarisation index, Dielectric Absorption Ratio, Step Voltage, Dielectric discharge and ramp testing.
CATALOGUE |
|
S1-568 5 KV Digital Insulation Tester - S1-568 5 kV insulation resistance testers has been designed, specified and tested to meet the stringent requirements of power utilities in the 21st century. In addition to being tough, high performance insulation testers the S1-568 Megger offers the ability to perform accurate insulation resistance measurements in extreme, high noise environments, rapid charging of cable capacitance, and even remote operation for both convenience and safety.
CATALOGUE |
|
S1-1068 10 KV Digital Insulation Tester - S1-1068 10 kV insulation resistance testers has been designed, specified and tested to meet the stringent requirements of power utilities in the 21st century. In addition to being tough, high performance insulation testers the S1-1068 Megger offers the ability to perform accurate insulation resistance measurements in extreme, high noise environments, rapid charging of cable capacitance, and even remote operation for both convenience and safety.
For service companies the S1-1068 represents an excellent choice with its flexibility and future proofing capability.
Quite simply the Megger S1-Series is designed to work wherever you work.
CATALOGUE |
|
210415-47 15 KV Mega ohm Meter -
The 5- and 15-kV Megohm-meters are high-voltage, line-operated instruments. They provide a continuously variable test voltage for highly sensitive insulation-resistance measurements of all types of electrical equipment and power cable.
The instruments are designed to withstand harsh field conditions, and feature tough, impact-resistance casing, removable lids and adjustable carrying straps. For complete portability, there is ample room in each case to store cables and the instruction manual.
CATALOGUE |
|
DET 4TR2 Digital Earth Tester - The MEGGER DET4TD2 and DET4TR2 is mainly characterized by having the 3 ? digit contrast of high quality on its liquid crystal display. It has a high protection of 54 for its ip. There are many in this which can are operated automatic .The automatically operated ones in this are noise check, c spike, p stake. The noise rejection has a volt of 40v peak to peak.
CATALOGUE |
|
DET 4TCR2 Digital Earth Tester - The Megger DET4TCR2 Digital Ground Tester & Clamps Kit offers a comprehensive solution to your ground stake and soil resistivity testing needs. This Megger Earth Testing Kit includes the Megger ICLAMP and VCLAMP. The ICLAMP employs the Attached Rod Technique (ART) which allows electrode testing without disconnection and leakage current measurements down to 1mA. The VCLAMP enables true stakeless measurements to be made in situations where driving stakes into the ground is impractical.
CATALOGUE |
|
TTR 310-47 Three Phase Turn Ratio Tester - The TTR300 Series of three-phase transformer turns ratio test sets are designed to measure the turns ratio of power, instrument, and distribution transformers in a substation or manufacturing environment. The instruments are ideal for use by power transformer manufacturers. Their unique testing procedures and storage capability allows an operator to set up and test difficult three-phase transformers in a fraction of the time than it used to take with other TTRs.
The TTR300 Series also measure the phase deviation of the transformer primary versus secondary. This quickly indicates problems such as partial shorted turns and core faults. This is also useful in verifying phase errors in all types of PTs and CTs.
CATALOGUE |
|
ODEN AT2/S Primary Current Injection Test Kit - This powerful test system is designed for primary injection testing of protective relay equipment and circuit breakers. It is also used to test the turns ratio of current transformers and for other applications that require high variable currents. Most advanced primary current injection test system to simplify all types of switchgear and CT commissioning, ground grid, circuit breaker testing and more.
CATALOGUE |
|
SMRT 36 Relay Test Kit - For size, weight, and features the SMRT36 is conceivably the smallest, lightest, highest output powered, complete three phase relay test system in the world today. The test system may be customized by adding the number of Voltage-Current, "VIGEN", modules needed for specific test applications. For electric utility use, the SMRT36 with three VIGEN Modules provides complete three-phase testing of three-phase impedance, directional power, negative sequence overcurrent and other devices that require a three-phase four-wire wye connected source.
CATALOGUE |
|
OTS 100 AF 100 KV Oil Test Set - Megger's automatic laboratory oil test sets perform accurate breakdown voltage tests on mineral, ester and silicon insulating liquids. Moulded test vessels give repeatable results with lock in precision electrode gap setting adjustment wheels. The transparent, shielded lid and large test chamber enable easy access to the test vessel.
CATALOGUE |
|
FRAX 99 SFRA Test Kit - The FRAX series of sweep frequency response analyzers (SFRA) detects potential mechanical and electrical problems that other methods are unable to detect. Major utilities and service companies have used the FRA method for more than a decade. The measurement is easy to perform and will capture a unique fingerprint of the transformer. The measurement is compared to a reference fingerprint and gives a direct answer if the mechanical parts of the transformer are unchanged or not. Deviations indicate geometrical and/or electrical changes within the transformer.
CATALOGUE |
|
IDAX 300 Insulation Diagnostic Analyzer (FDS Test Kit) - IDAX300 is a very compact instrument and is used together with an external computer. The IDAX350 has a built-in computer but can also be used with an external computer.
IDAX300 and IDAX350 provide an accurate and reliable condition assessment of insulation in transformers, bushings, generators and cables. The IDAX system maximizes the outcome of maintenance activities allowing for load and service life optimization.
CATALOGUE |
|
DCM 300 E Earth Leakage Current Tester - The DCM300E Earth Leakage Clamp designed primarily to check earth leakage currents with a dedicated 30 mA range providing resolution down to 10 µA. The capabilities of the DCM300E extend to measuring currents of up to 300 A ac, making it a highly versatile instrument capable of taking current measurements in a wide variety of situations and applications.
CATALOGUE |
